savaglio
Joined: 02 Feb 2006
Posts: 22
Location: Ann Arbor
|
 Posted: Mon Mar 01, 2010 1:07 pm Post subject: IP-Sine Frequency Fluctuation |
 |
|
If you experience a problem with frequency oscillation for a commanded static value be sure to check your hardware setup for proper signal loading.
As noted in the ADvantage documentation, the max current for the IP-Sine signal is ±20 mA. In some cases it may be necessary to add a resistor in series with your configuration's load/device to lower the current draw. |
|
FAQ
Search
Usergroups
Register
Profile
Log in to check your private messages
Log in
